EFFERVESCENTS

Bottling of Effervescent Products

SERVICE OVERVIEW

Mobile bottling services for sparkling products elaborated via the Charmat method (cuve close), as well as semi-sparkling (pétillant) and gently sparkling (perlant) styles, utilizing an isobaric (counter-pressure) bottling line with throughputs up to 1 800 bottles per hour.

This comprehensive, turnkey service is suitable for wine, cider, kombucha, and beer.

The line is equipped with an anti-condensation system and supports direct inline labelling.
For carbonated products up to 3 g/L of CO₂ carbonation can be performed directly inline during the bottling process using molecular membrane contactor technology.
Pre-filtration is essential prior to bottling any sparkling product. Our crossflow filtration service is available to meet this requirement.

 

FEATURES OF OUR ISOBARIC BOTTLING LINE

This cutting-edge bottling plant adapts to a multitude of bottle formats and closure styles. It enables inline labelling with a temperature differential of up to 15°C.

Bottling Process:

The line features a cooling system capable of lowering the liquid temperature by 5°C, as well as an inline dual-injection system for oenological additives. Filling and capping are handled by the ALFATEK QBSV 15/1 ISO isobaric monobloc, while the two-phase (water + gas) electropneumatic rinsing and blowing station completes the process.

Bottling Filtration:

The water used for daily operations and bottle rinsing is purified by reverse osmosis and filtered at 0.20 μm. The line utilizes three sets of three membrane filters, consisting of pre-filtration cartridges (1.2 µm and 0.65 µm) followed by 0.45 µm cartridges for final filtration. All cartridges are supplied by VINISERVE.

Compatible Bottle Formats:

The line can accommodate 200 mL, 330 mL, 500 mL, 750 mL, and 1,500 mL (magnum) bottle formats, as well as 250 mL aluminum bottles.

Closure Options:

The corker-capper is equipped with an electropneumatic gas injector prior to closure application. It is suitable for standard straight corks as well as 26.5 mm or 36 mm sparkling wine (mushroom) corks with wirehoods. The cork hopper features an automatic orientation system. The line is also equipped to apply 26 mm or 29 mm crown caps, as well as screwcaps (ROPP), including 30 x 60 mm STELVIN® Pressure.

FLEXIBLE ONE-STEP BOTTLING

Packaging sparkling products is typically handled separately from the bottling line, as condensation on the cold glass surface makes label application incredibly difficult.
Our comprehensive sparkling bottling service, however, achieves everything in a single step. Thanks to our advanced heating tunnel (a dynamic radiant conditioning system) that rapidly brings the bottles to room temperature, inline labeling takes place immediately after the ultra-low temperature filling process that sparkling products require.
We offer a wide range of packaging and labeling options:
  • Front and back label combinations, long wrap-around labels
  • PVC and polylaminate capsules
  • Medaillon labels
  • Long and short foils
  • Neck bands for long and short foils
  • Traceability laser coding
  • Top and bottom case sealer

Centered or off-center medallions

 

Long or short foils, with optional neck bands

  • THE BENEFITS OF INLINE LABELING OF EFFERVESCENTS

    Hygiene & Cleanliness

    • Our dynamic radiant conditioning system prevents the buildup of limescale, algae, and microorganisms on the equipment and bottle surfaces. This keeps the entire bottling process perfectly clean and hygienic. Bottles emerge from the heating tunnel completely dry and residue-free, eliminating the need for a separate air-drying stage.
    Energy Efficiency
    • The heating tunnel’s catalytic system operates at 98.5% efficiency. Every bit of energy is directed exclusively toward warming the bottles, maximizing thermal performance.

    Time Savings

    • This technology cuts bottle warming time by 50% compared to traditional hot-water systems. The bottle temperature increases by 15°C in just a few minutes, accelerating the entire production line and boosting overall throughput.

TRUCK DESIGN

  • Our Custom Mobile Unit: High-Tech Bottling on the Move

    The trailer was custom-engineered specifically for our production line. The slide-out compartment and upward-lifting side panel allow our team to work comfortably from the ground, providing direct access to the machinery for faster adjustments and highly efficient maintenance.

TECHNICAL SPECIFICATIONS

SITE & ACCESS REQUIREMENTS

Our isobaric bottling line is housed in a 53-foot drop-deck trailer, transported by a 10-wheel semi-truck. Adequate workspace must be provided for site access, trailer positioning, and setting up the staging area—including space for the conveyor system and bottle pallets. A firm ground surface (e.g., concrete, asphalt, or gravel) is required. The ground slope must not exceed 2% in any direction.

NITROGEN SUPPLY

Our onboard nitrogen generator and compressor are dedicated solely to supplying the nitrogen required for the bottling line operations. The client is responsible for providing the nitrogen necessary to maintain pressure in their own tank.

CARBON DIOXIDE SUPPLY

Any CO2 required to adjust the carbonation level must be provided by the client.